.svg){kind=logo}
AIRDUC® PUR 356 EC (XHD)
Electrically conductive polyurethane hose, super-heavy
Product details
Applications
- hose/ ducting for high throughput of extremely abrasive bulk material, granulate and stone
- vacuum truck, suction vehicle, dry suction truck: industrial cleaning, furnace cleaning
- explosion hazard area
- Coal mine, mine, tunnelling: ventilation, methane extraction
- raw material conveying hose for powders, granulates, sand, quartz, gravel, shards and chips/ shavings
- silos and tankers: silo charging, silo discharging
Properties
- super heavy-duty
- extremely abrasion-resistant with reinforcement underneath wire and narrow hose pitch
- good resistance to oil, gasoline and chemicals
- very good low temperature flexibility
- electrically conductive wall: electrical and surface resistance <10³Ω (according to NFPA 652 <10⁶ Ω)
- in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: pneumatic transport of flammable dusts and bulk materials (Zone 20, 21, 22 inside), aspiration of combustible dusts (Zone 22 inside),
- in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: for conveying for flammable liquids (inside zone 0, 1, 2), for conveying for non-flammable liquids, for use in zone 1 and 2 (gases), for use in zone 0 (gases)
- according to DIN 26057 Type 4
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
Temperature Range
- -40°C to 90°C
Design
- AIRDUC® profile hose
- 1. spring steel wire firmly embedded in wall
- 2. wall: electrically conductive premium ester-polyurethane (Pre-PUR®)
- 3. wall thickness 2,0 to 2,5 mm approx.
- 4. reinforcement of the primary abrasion areas
Delivery variants
- further diameters and lengths available on request
- black (standard)
- customer-specific branding
Article variants
I.D.
(in / mm)
(in / mm)
outer Ø
(mm)
(mm)
Pressure
(bar)
(bar)
Vacuum
(bar)
(bar)
Bending
Radius
(mm)
Radius
(mm)
Weight
(kg/m)
(kg/m)
Dimensions
in Stock
(m)
in Stock
(m)
Production
Lengths
(m)
Lengths
(m)
Order No.
Further Article Details
I.D. (in / mm)
- / 40
outer Ø (mm)
51.00
Pressure (bar)
3,635
Vacuum (bar)
1,000
Bending Radius (mm)
109.00
Weight (kg/m)
0.82
Dimensions in Stock (m)
-
Production Lengths (m)
10
Further Article Details
I.D. (in / mm)
- / 50
outer Ø (mm)
61.00
Pressure (bar)
2,950
Vacuum (bar)
1,000
Bending Radius (mm)
134.00
Weight (kg/m)
1.00
Dimensions in Stock (m)
-
Production Lengths (m)
10 15
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (mm)
62.00
Pressure (bar)
2,800
Vacuum (bar)
1,000
Bending Radius (mm)
134.00
Weight (kg/m)
1.01
Dimensions in Stock (m)
-
Production Lengths (m)
10 15
Further Article Details
I.D. (in / mm)
2,36 / 60
outer Ø (mm)
71.00
Pressure (bar)
2,485
Vacuum (bar)
1,000
Bending Radius (mm)
156.00
Weight (kg/m)
1.18
Dimensions in Stock (m)
-
Production Lengths (m)
10
Further Article Details
I.D. (in / mm)
- / 75
outer Ø (mm)
87.00
Pressure (bar)
2,010
Vacuum (bar)
1,000
Bending Radius (mm)
195.00
Weight (kg/m)
1.46
Dimensions in Stock (m)
-
Production Lengths (m)
10
Further Article Details
I.D. (in / mm)
3 / 76
outer Ø (mm)
88.00
Pressure (bar)
1,995
Vacuum (bar)
1,000
Bending Radius (mm)
195.00
Weight (kg/m)
1.48
Dimensions in Stock (m)
-
Production Lengths (m)
10
Further Article Details
I.D. (in / mm)
- / 100
outer Ø (mm)
113.00
Pressure (bar)
1,685
Vacuum (bar)
1,000
Bending Radius (mm)
272.00
Weight (kg/m)
2.27
Dimensions in Stock (m)
-
Production Lengths (m)
10 15
Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the inside of the hose arch. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data. Additional information at www.norres.com/en/technology/.
Accessories
CLAMP 211
T-bolt clamp for attaching heavy-duty hoses with a smooth outer wall
To the product
CLAMP 216
Hose Clamp for watertight attachment of heavy, externally corrugated spiral hoses
To the product
CONNECT 228
Elastic clamp protection tape
To the product
CONNECT SAFETY CLAMP ASSEMBLY 231
Universal safety clamp coupling system incl. assembly if appropriate
To the product
CONNECT PRESS ASSEMBLY 232
Crimped coupling system incl. assembly
To the product
CONNECT MOULD ASSEMBLY 233
Potted coupling system incl. assembly
To the product
CONNECT THREAD FITTING 234
Threaded adapter
To the product
CONNECT 240 + 241 AS
Soft sleeve to slide onto connectors or push into pipes
To the product
CONNECT 240 EC
Soft sleeve to slide onto connectors or push into pipes, electrically conductive
To the product
CONNECT 242
Threaded adapter
To the product
CONNECT 243
Flanged pipe according to the popular pipe systems in the ventilation field (for example Jacob-Standard)
To the product
CONNECT 244
2-part loose flange to fit mating flanges acc. to DIN 2632/2633, hole pattern DIN-EN 1092-1
To the product
CONNECT 245
TRI-Clamp coupling to fit adapter acc. to DIN 32676
To the product
CONNECT 246 AS
Spiral hose connector for connecting, lengthening or repairing spiral hoses
To the product