.svg){kind=logo}
PROTAPE® TPE 326 MEMORY
Crush resistant exhaust gas hose
Product details
Application
- flexible hose/ ducting for hot gases
- vehicle/ car gas exhaust system, gas extraction: hose reel, slotted floor channel, underfloor extraction system
- engine test bench, exhaust gas measurement
Properties
- fabric reinforced
- highly flexible + compressible
- protected, flow-optimizing exterior folds
- vibration resistant
- crush resistant
- good resistance to chemicals
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
Temperature range
- exhaust gas temperatures to 390°F *
- * when correctly applied with exhaust gas funnels and sufficient fresh air supply (50% approximate).
Design
- PROTAPE® tape hose
- 1. special plastic-profile supporting spiral
- 2. fabric-reinforced tape; wall: EPDM/ PP coated fabric
- 3. wall thickness 0.015 in approx.
Delivery variants
- further diameters and lengths available on request
- black (standard)
- special colors: colored spiral
- customer-specific branding
Article variants
I.D.
(in / mm)
(in / mm)
outer Ø
(in)
(in)
Vacuum
(inHG)
(inHG)
Bending
radius
(in)
radius
(in)
Weight
(lb/ft)
(lb/ft)
Dimensions
in Stock
(ft)
in Stock
(ft)
Production
lengths
(ft)
lengths
(ft)
Order No.
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (in)
2.677
Vacuum (inHG)
11.812
Bending radius (in)
1.890
Weight (lb/ft)
0.255
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
2,5 / 63-65
outer Ø (in)
3.150
Vacuum (inHG)
8.268
Bending radius (in)
2.087
Weight (lb/ft)
0.323
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (in)
3.661
Vacuum (inHG)
5.020
Bending radius (in)
2.362
Weight (lb/ft)
0.363
Dimensions in Stock (ft)
25 50
Production lengths (ft)
15 20 30 40
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (in)
4.685
Vacuum (inHG)
1.477
Bending radius (in)
2.795
Weight (lb/ft)
0.477
Dimensions in Stock (ft)
25 50
Production lengths (ft)
15 20 30 40
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (in)
5.669
Vacuum (inHG)
1.034
Bending radius (in)
3.937
Weight (lb/ft)
0.585
Dimensions in Stock (ft)
25 50
Production lengths (ft)
15 20 30 40
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (in)
6.654
Vacuum (inHG)
0.886
Bending radius (in)
4.331
Weight (lb/ft)
0.699
Dimensions in Stock (ft)
25 50
Production lengths (ft)
15 20 30 40
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (in)
8.661
Vacuum (inHG)
0.295
Bending radius (in)
6.102
Weight (lb/ft)
0.921
Dimensions in Stock (ft)
25
Production lengths (ft)
15 20 30
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.
Accessories
CLAMP 212
Bridge clamp for attaching externally corrugated spiral hoses
To the product
CLAMP 213
Bridge Clamp with quick-release closure for attaching externally corrugated spiral hoses
To the product
CLAMP 217
Bridge clamp with eyelet for attaching externally corrugated spiral hoses
To the product
CONNECT 228
Elastic clamp protection tape
To the product
CONNECT 270-271
Metal hose connector / reducer
To the product