us

PROTAPE® TPE 321 REINFORCED (LD)

PROTAPE_TPE_321_REINFORCED_(LD)_main.jpg
PROTAPE_TPE_321_REINFORCED_(LD)_main.jpg design
TPE hose, light weight, fabric reinforced (up to +257°F)
Gas High flexibility
Request
Datasheet
Product details Article variants Documents Accessories

Product details

Application

  • flexible hose/ ducting for hot and cold gases
  • granulate/ plastic dryer, hot air dryer
  • film blowing machine, cooling air at the extrusion tool
  • air supply: UV dryer, IR dryer
  • textile industry, steam soaking: steam iron, industrial ironing machine, smoothing iron
  • bus, utility vehicle, caravan/ trailer, mobile home/ camper/ RV, boat, ship/ vessel/ marine, yacht: ventilation, heating
  • paper mill, paper and pulp industry: waste water, air extraction
  • heating system/ heater: fresh air supply

Properties

  • fabric reinforced
  • lightweight
  • highly flexible + compressible
  • very good heat resistance
  • conforms to RoHS guideline
  • good resistance to oil, gasoline, and chemicals
  • good resistance to alkalis and acids
  • REACH according to --> Technology / Technical Information / REACH

Temperature range

  • -40°F to 230°F
  • short time to 255°F

Design

  • PROTAPE® tape hose
  • spring steel wire integrated in wall
  • fabric-reinforced tape
  • wall: EPDM/ PP coated fabric
  • wall thickness 0.015 in approx.

Delivery variants

  • further diameters and lengths available on request
  • black (standard)

Article variants

I.D.


(in / mm)
outer Ø


(in)
Pressure


(psi)
Vacuum


(inHG)
Bending
radius

(in)
Weight


(lb/ft)
Production
lengths

(ft)
Order No.
2 / 50-51
2.110
4.351
2.953
1.969
0.141
-
321-0050-0000
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (in)
2.110
Pressure (psi)
4.351
Vacuum (inHG)
2.953
Bending radius (in)
1.969
Weight (lb/ft)
0.141
Production lengths (ft)
-
3 / 75-76
3.094
2.901
2.067
2.756
0.208
-
321-0075-0000
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (in)
3.094
Pressure (psi)
2.901
Vacuum (inHG)
2.067
Bending radius (in)
2.756
Weight (lb/ft)
0.208
Production lengths (ft)
-
4 / 100-102
4.094
2.176
1.477
3.937
0.376
-
321-0100-0000
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (in)
4.094
Pressure (psi)
2.176
Vacuum (inHG)
1.477
Bending radius (in)
3.937
Weight (lb/ft)
0.376
Production lengths (ft)
-
5 / 125-127
5.079
1.886
1.181
4.921
0.457
-
321-0125-0000
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (in)
5.079
Pressure (psi)
1.886
Vacuum (inHG)
1.181
Bending radius (in)
4.921
Weight (lb/ft)
0.457
Production lengths (ft)
-
6 / 150-152
6.063
1.595
1.181
5.906
0.491
-
321-0150-0000
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (in)
6.063
Pressure (psi)
1.595
Vacuum (inHG)
1.181
Bending radius (in)
5.906
Weight (lb/ft)
0.491
Production lengths (ft)
-
8 / 200-203
8.031
1.160
0.738
7.874
0.860
-
321-0200-0000
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (in)
8.031
Pressure (psi)
1.160
Vacuum (inHG)
0.738
Bending radius (in)
7.874
Weight (lb/ft)
0.860
Production lengths (ft)
-
- / 250
10.031
1.015
0.591
9.843
0.941
25 50
321-0250-0000
Further Article Details
I.D. (in / mm)
- / 250
outer Ø (in)
10.031
Pressure (psi)
1.015
Vacuum (inHG)
0.591
Bending radius (in)
9.843
Weight (lb/ft)
0.941
Production lengths (ft)
25 50
- / 300
12.000
0.725
0.443
11.811
1.042
25 50
321-0300-0000
Further Article Details
I.D. (in / mm)
- / 300
outer Ø (in)
12.000
Pressure (psi)
0.725
Vacuum (inHG)
0.443
Bending radius (in)
11.811
Weight (lb/ft)
1.042
Production lengths (ft)
25 50
- / 350
13.969
0.580
0.443
13.780
1.075
10
321-0350-0000
Further Article Details
I.D. (in / mm)
- / 350
outer Ø (in)
13.969
Pressure (psi)
0.580
Vacuum (inHG)
0.443
Bending radius (in)
13.780
Weight (lb/ft)
1.075
Production lengths (ft)
10
- / 400
15.937
0.580
0.443
15.748
1.190
10
321-0400-0000
Further Article Details
I.D. (in / mm)
- / 400
outer Ø (in)
15.937
Pressure (psi)
0.580
Vacuum (inHG)
0.443
Bending radius (in)
15.748
Weight (lb/ft)
1.190
Production lengths (ft)
10
- / 450
17.906
0.435
0.295
17.717
1.337
10
321-0450-0000
Further Article Details
I.D. (in / mm)
- / 450
outer Ø (in)
17.906
Pressure (psi)
0.435
Vacuum (inHG)
0.295
Bending radius (in)
17.717
Weight (lb/ft)
1.337
Production lengths (ft)
10
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.

Documents

Montagehinweis / Assembly Information (384.89 KB) Verlegerichtlinien / Installation guidelines (201.24 KB)

Accessories

CLAMP 210 BRIDGE CLAMP
Clamp with plastic bridge for attaching externally corrugated spiral hoses
To the product
CLAMP 212
Bridge clamp for attaching externally corrugated spiral hoses
To the product
CLAMP 213
Bridge Clamp with quick-release closure for attaching externally corrugated spiral hoses
To the product
CLAMP 217
Bridge clamp with eyelet for attaching externally corrugated spiral hoses
To the product
CONNECT 223
Shrink sleeve for connecting one hose to another or to an adapter
To the product
CONNECT 228
Elastic clamp protection tape
To the product
CONNECT 270-271
Metal hose connector / reducer
To the product