.svg){kind=logo}
PROTAPE® TPE 320 AS (XLD)
TPE hose, light weight, antistatic
Product details
Application
- flexible hose/ ducting for hot and cold gases and for dust, powder, fibers
- granulate/ plastic dryer, hot air dryer
- film blowing machine, cooling air at the extrusion tool
- air supply: UV dryer, IR dryer
- textile industry, steam soaking: steam iron, industrial ironing machine, smoothing iron
- bus, utility vehicle, caravan/ trailer, mobile home/ camper/ RV, boat, ship/ vessel/ marine, yacht: ventilation, heating
- heating system/ heater: fresh air supply
Properties
- lightweight
- highly flexible + compressible
- very good heat resistance
- good resistance to oil, gasoline, and chemicals
- good resistance to alkalis and acids
- Permanently antistatic wall: in accordance with ISO 8031 electrical and surface resistance approx. 10⁹ Ω
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
Design
- PROTAPE® tape hose
- 1. spring steel wire integrated in wall
- 2. wall: thermoplastic rubber (TPE), antistatic
- 3. wall thickness 0.02 in approx.
Temperature range
- -40°F to 255°F
- short time to 300°F
Delivery variants
- further diameters and lengths available on request
- black (standard)
- special colors: full colored
- customer-specific branding
- ID 1,5"/ 38mm 12/305mm compressed packed in poly bag (low transportation cost / risk, minimum storage size), ID 12"/315mm 20"/500mm not compressed
Article variants
I.D.
(in / mm)
(in / mm)
outer Ø
(in)
(in)
Pressure
(psi)
(psi)
Vacuum
(inHG)
(inHG)
Bending
radius
(in)
radius
(in)
Weight
(lb/ft)
(lb/ft)
Dimensions
in Stock
(ft)
in Stock
(ft)
Production
lengths
(ft)
lengths
(ft)
Order No.
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (in)
2.283
Pressure (psi)
3.408
Vacuum (inHG)
3.101
Bending radius (in)
1.299
Weight (lb/ft)
0.155
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
2,36 / 60
outer Ø (in)
2.677
Pressure (psi)
2.828
Vacuum (inHG)
2.658
Bending radius (in)
1.496
Weight (lb/ft)
0.175
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
Further Article Details
I.D. (in / mm)
- / 70
outer Ø (in)
3.071
Pressure (psi)
2.466
Vacuum (inHG)
2.215
Bending radius (in)
1.693
Weight (lb/ft)
0.202
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (in)
3.268
Pressure (psi)
2.321
Vacuum (inHG)
2.067
Bending radius (in)
1.811
Weight (lb/ft)
0.222
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
- / 80
outer Ø (in)
3.465
Pressure (psi)
2.176
Vacuum (inHG)
1.919
Bending radius (in)
1.890
Weight (lb/ft)
0.242
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (in)
4.291
Pressure (psi)
1.740
Vacuum (inHG)
1.624
Bending radius (in)
2.283
Weight (lb/ft)
0.349
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (in)
5.276
Pressure (psi)
1.378
Vacuum (inHG)
1.329
Bending radius (in)
2.795
Weight (lb/ft)
0.430
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
5,5 / 140
outer Ø (in)
5.827
Pressure (psi)
1.233
Vacuum (inHG)
1.181
Bending radius (in)
3.071
Weight (lb/ft)
0.477
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (in)
6.260
Pressure (psi)
1.160
Vacuum (inHG)
0.738
Bending radius (in)
3.268
Weight (lb/ft)
0.511
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
6,3 / 160
outer Ø (in)
6.614
Pressure (psi)
1.088
Vacuum (inHG)
0.738
Bending radius (in)
3.465
Weight (lb/ft)
0.538
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
Further Article Details
I.D. (in / mm)
7 / 178-180
outer Ø (in)
7.402
Pressure (psi)
0.943
Vacuum (inHG)
0.591
Bending radius (in)
3.858
Weight (lb/ft)
0.612
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (in)
8.268
Pressure (psi)
0.870
Vacuum (inHG)
0.591
Bending radius (in)
4.252
Weight (lb/ft)
0.679
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
- / 250
outer Ø (in)
10.157
Pressure (psi)
0.725
Vacuum (inHG)
0.443
Bending radius (in)
5.236
Weight (lb/ft)
0.813
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.
Accessories
CLAMP 210 BRIDGE CLAMP
Clamp with plastic bridge for attaching externally corrugated spiral hoses
To the product
CLAMP 212
Bridge clamp for attaching externally corrugated spiral hoses
To the product
CLAMP 213
Bridge Clamp with quick-release closure for attaching externally corrugated spiral hoses
To the product
CLAMP 217
Bridge clamp with eyelet for attaching externally corrugated spiral hoses
To the product
CONNECT 223
Shrink sleeve for connecting one hose to another or to an adapter
To the product
CONNECT 228
Elastic clamp protection tape
To the product
CONNECT 270-271
Metal hose connector / reducer
To the product