Choosing the right hose is vitally important when it comes to dust and fume extraction, and a decisive factor for achieving a long service life and optimum performance. Industrial hoses used for dust and fume extraction are exposed to high loads. They are primarily employed to extract and transport gaseous materials or fine dusts. Temperature resistance, flexibility, flame retardancy and impermeability are the most important hose properties for applications in this industry.

Efficient hose solutions for extreme conditions

A long service life and significantly extended replacement intervals for heavy-duty suction and blast hoses present daunting challenges for manufacturers serving the dust and fume extraction sector, for example, where temperature resistance is a top priority. When it comes to suction and blast hoses for this industry, the NORRES Group relies on proven quality and specialises in efficient solutions leading to sustainable cost reductions.

The flexible dust extraction hose PROTAPE^® PVC 371 (HD) for the extraction of abrasive dust has a special polyester fabric: It is PVC-coated, with a spring steel wire helix reinforcement incorporated between two thermo-welded layers, self-extinguishing according to DIN 75200 standard.

The PROTAPE^® PVC 371 AS (HD) is ideally suited for the extraction of abrasive dust, flammable vapours suction and textile fibres suction. Made of PVC-coated special polyester fabric with spring steel wire helix reinforcement incorporated between two thermo-welded layers - can be used in a temperature range from -20°C to +90°C. Antistatic according to DIN 54345 standard (R < 1 x 108 Ω) and self-extinguishing class 2.

PROTAPE^® PUR 301 AS (XLD) – Highly flexible and super-lightweight, flame-retardant according to UL94-HB and DIN 4102-B1. Permanently antistatic wall: electrical and surface resistance of <10⁹ Ω in accordance with ISO 8031. TRGS 727 and ATEX 2014/34/EU (1999/92/EC) certification: for the aspiration of combustible dust (Zone 22 indoor), for conveying non-flammable liquids for use in Zones 1 & 2 (gases).

PROTAPE^® PUR 330 AS (LD) – Particularly suitable for use on extraction units as well as dedusting and filter systems or for oil mist and galvanic extraction owing to a combination of high flexibility and high abrasion resistance and flame retardancy. The hose wall is permanently antistatic, with an electrical and surface resistance of <10⁹ Ω in accordance with ISO 8031. The hose additionally has TRGS 727 and ATEX 2014/34/EU certification.*

AIRDUC^® PUR 350 AS BLACK (MD) – The optimal hose solution for pneumatic transport of flammable bulk materials, with a temperature range from -40°C to +90°C (short time to +125°C) as well as TRGS 727 and ATEX 2014/34/EU certification.*

PROTAPE^® PVC 371 HT (LD) – On extraction arms or for welding fume extraction, properties such as high flexibility, a super-lightweight design, flame retardancy and good to very good heat resistance are indispensable.

CLAMP 210 BRIDGE CLAMP – This bridge clamp is ideal for attaching lightweight hoses. Thanks to its special bridge geometry, the clamp enables practically leak-proof and secure clamping. It is fitted quickly and easily, and it is also re-usable.

* Further information can be found on the data sheet of the respective product