PROTAPE® PUR 332 SE (LD)

Suction hose and pressure hose according to DIN 4102-B1, light
Gas + Dust Pre-PUR® Abrasion-resistant High flexibility Microbe-resistant Flame retardant

Product details

Applications

  • flexible hose/ ducting for gases and for abrasive dust, powder, fibres
  • rail vehicle, train, railway, tram, boat, ship/ vessel, yacht: ventilation, heating, roof drainage, sand conveying in rail vehicle braking systems, sanitary installation

Properties

  • lightweight
  • highly flexible + compressible 3:1
  • abrasion-resistant
  • microbe and hydrolysis resistant
  • good resistance to oil, gasoline and chemicals
  • flame-retardant according to: DIN 4102-B1, FMVSS 302
  • conforms to RoHS guideline
  • REACH according to --> Technology / Technical Information / REACH

Temperature Range

  • -40°C to 90°C
  • short time to 125°C

Design

  • PROTAPE® tape hose
  • 1. spring steel wire integrated in wall
  • 2. extruded tape; wall: special premium polyurethane with flame retardant additive (Pre-PUR®)
  • 3. wall thickness 0,6 mm approx.

Delivery variants

  • further diameters and lengths available on request
  • transparent (standard)
  • special colours: partially coloured, completely coloured
  • customer-specific branding

Article variants

I.D.


(in / mm)
outer Ø


(mm)
Pressure


(bar)
Vacuum


(bar)
Bending
Radius

(mm)
Weight


(kg/m)
Production
Lengths

(m)
Order No.
- / 40
47.00
1,015
0,300
47.00
0.26
15
Further Article Details
I.D. (in / mm)
- / 40
outer Ø (mm)
47.00
Pressure (bar)
1,015
Vacuum (bar)
0,300
Bending Radius (mm)
47.00
Weight (kg/m)
0.26
Production Lengths (m)
15
2,5 / 63-65
73.00
0,630
0,180
73.00
0.47
10 15
Further Article Details
I.D. (in / mm)
2,5 / 63-65
outer Ø (mm)
73.00
Pressure (bar)
0,630
Vacuum (bar)
0,180
Bending Radius (mm)
73.00
Weight (kg/m)
0.47
Production Lengths (m)
10 15
Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the inside of the hose arch. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data. Additional information at www.norres.com/en/technology/.

Accessories