.svg){kind=logo}
CLAMP 216
Hose Clamp for watertight attachment of heavy, externally corrugated spiral hoses
Product details
Properties
- watertight and tensile connection at very low overpressure due to special spiral geometry
- easily and quickly fitted
- re-usable
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
Design
- Quality: W2; Clamp strip: stainless steel 1.4016 = AISI 430; Clamp wire: stainless steel 1.4310 = AISI 301 (INOX); Screw: chromated steel; Body: stainless steel 1.4016 = AISI 430
Delivery variants
- further diameters available on request
Suitable for hose
- AIRDUC®: 345; 355 + 356 (AS/ FOOD / INOX FOOD-AS / HT / EC)
Article variants
Suitable for
Hose I.D.
(mm)
Hose I.D.
(mm)
Order No.
Sealing clamp for AIRDUC® 356 hoses with an inner Ø of <50 mm
Further Article Details
Suitable for Hose I.D. (mm)
32
Further Article Details
Suitable for Hose I.D. (mm)
38
Further Article Details
Suitable for Hose I.D. (mm)
40
Further Article Details
Suitable for Hose I.D. (mm)
45
Sealing clamp for AIRDUC® 345, 355, hoses with an inner Ø of <50 mm
Further Article Details
Suitable for Hose I.D. (mm)
32
Further Article Details
Suitable for Hose I.D. (mm)
38
Further Article Details
Suitable for Hose I.D. (mm)
40
Further Article Details
Suitable for Hose I.D. (mm)
45
Sealing clamp for AIRDUC® 345, 355, 356 hoses with an inner Ø of >= 50 mm
Further Article Details
Suitable for Hose I.D. (mm)
50
Further Article Details
Suitable for Hose I.D. (mm)
55
Further Article Details
Suitable for Hose I.D. (mm)
60
Further Article Details
Suitable for Hose I.D. (mm)
65
Further Article Details
Suitable for Hose I.D. (mm)
70
Further Article Details
Suitable for Hose I.D. (mm)
75
Further Article Details
Suitable for Hose I.D. (mm)
80
Further Article Details
Suitable for Hose I.D. (mm)
90
Further Article Details
Suitable for Hose I.D. (mm)
100
Further Article Details
Suitable for Hose I.D. (mm)
102
Further Article Details
Suitable for Hose I.D. (mm)
110
Further Article Details
Suitable for Hose I.D. (mm)
115
Further Article Details
Suitable for Hose I.D. (mm)
120
Further Article Details
Suitable for Hose I.D. (mm)
125
Further Article Details
Suitable for Hose I.D. (mm)
127
Further Article Details
Suitable for Hose I.D. (mm)
130
Further Article Details
Suitable for Hose I.D. (mm)
140
Further Article Details
Suitable for Hose I.D. (mm)
150
Further Article Details
Suitable for Hose I.D. (mm)
152
Further Article Details
Suitable for Hose I.D. (mm)
160
Further Article Details
Suitable for Hose I.D. (mm)
175
Further Article Details
Suitable for Hose I.D. (mm)
180
Further Article Details
Suitable for Hose I.D. (mm)
200
Further Article Details
Suitable for Hose I.D. (mm)
225
Further Article Details
Suitable for Hose I.D. (mm)
250
Further Article Details
Suitable for Hose I.D. (mm)
300
Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the inside of the hose arch. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data. Additional information at www.norres.com/en/technology/.
