.svg){kind=logo}
NORPLAST® PUR 387 ANTIABRASIVO®
Polyurethane hose, extremely heavy duty
Product details
Application
- hose/ ducting for high throughput of extremely abrasive bulk material, granulate and stone
- vacuum truck, suction vehicle, dry suction truck: industrial cleaning, furnace cleaning
- suction vehicles: roof gravelling, roof gravel conveying
- animal stall, animal shed: feedstuff conveying, feedstuff plant, animal feed transport
- raw material conveying hose for powders, granulates, sand, quartz, gravel, shards and chips/ shavings
- silo, silo vehicle/ silo truck, tanker/ tank truck: silo charging, silo discharging
- silo, silo vehicle/ silo truck, tanker/ tank truck: conveying of wood pellets, plastic granulate, plastic powder
Properties
- extremely heavy duty
- extremely abrasion resistant
- very high pressure, vacuum and compression resistance
- good resistance to chemicals
- very good low temperature flexibility
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
Temperature range
- 5°F to 140°F
Design
- Full plastic hose
- hard plastic spiral integrated in wall
- spiral: rigid PVC
- smooth interior
- wall: premium polyurethane (Pre-PUR®) inside layer, exterior soft PVC
Delivery variants
- further diameters and lengths available on request
- red inner tube + green exterior wall (standard)
- customer-specific branding
Article variants
I.D.
(in / mm)
(in / mm)
outer Ø
(in)
(in)
Vacuum
(inHG)
(inHG)
Operating
pressure
(68°F)
(bar)
pressure
(68°F)
(bar)
Bending
radius
(in)
radius
(in)
Weight
(lb/ft)
(lb/ft)
Production
lengths
(ft)
lengths
(ft)
Order No.
Further Article Details
I.D. (in / mm)
1,25 / 32
outer Ø (in)
1.693
Vacuum (inHG)
23.624
Operating pressure (68°F) (bar)
8,500
Bending radius (in)
7.559
Weight (lb/ft)
0.484
Production lengths (ft)
100
Further Article Details
I.D. (in / mm)
- / 40
outer Ø (in)
2.008
Vacuum (inHG)
23.624
Operating pressure (68°F) (bar)
8,000
Bending radius (in)
9.449
Weight (lb/ft)
0.638
Production lengths (ft)
100
Further Article Details
I.D. (in / mm)
1,75 / 44-45
outer Ø (in)
2.205
Vacuum (inHG)
23.624
Operating pressure (68°F) (bar)
7,500
Bending radius (in)
10.630
Weight (lb/ft)
0.672
Production lengths (ft)
100
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (in)
2.480
Vacuum (inHG)
23.624
Operating pressure (68°F) (bar)
7,500
Bending radius (in)
12.047
Weight (lb/ft)
0.793
Production lengths (ft)
100
Further Article Details
I.D. (in / mm)
2,36 / 60
outer Ø (in)
2.874
Vacuum (inHG)
23.624
Operating pressure (68°F) (bar)
7,000
Bending radius (in)
14.173
Weight (lb/ft)
0.941
Production lengths (ft)
100
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (in)
3.583
Vacuum (inHG)
23.624
Operating pressure (68°F) (bar)
5,500
Bending radius (in)
17.953
Weight (lb/ft)
1.478
Production lengths (ft)
100
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (in)
4.646
Vacuum (inHG)
23.624
Operating pressure (68°F) (bar)
4,000
Bending radius (in)
24.094
Weight (lb/ft)
2.151
Production lengths (ft)
60
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (in)
5.787
Vacuum (inHG)
23.624
Operating pressure (68°F) (bar)
3,500
Bending radius (in)
30.000
Weight (lb/ft)
2.991
Production lengths (ft)
60
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.