.svg){kind=logo}
CONNECT PRESS ASSEMBLY 232
Crimped coupling system incl. assembly
Product details
Application
- food industry, pharmaceutical industry: food, pharmaceutical
- vacuum conveying equipment, vacuum hopper, suction conveyor, dosing system
- pelleting machines/ tablet presses
Properties
- Food grade sealing insert, complies with: FDA 21 CFR 177.2600 and 178.2010, EU-Directive 10/2011, EC 1935/2004 and EU 2015/174
- special threaded sealing insert matched to the outer hose contour
- vibration resistant
- microbe and hydrolysis resistant
- good resistance to oil, gasoline, and chemicals
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
Temperature range
- -40°F to 195°F
Design
- patented coupling system
- 1. AIRDUC® profile hose
- 2. pressing sleeve: stainless steel 1.4404 = AISI 316L
- 3. Adapter
- 4. sealing insert: special premium ether-polyurethane (Pre-PUR®)
Delivery variants
- further diameters available on request
Suitable for hose
- AIRDUC®: 355 + 356 (AS / HT / FOOD / EC / INOX FOOD-AS);
BARDUC®: 382
Article variants
Size
(in)
(in)
Suitable for
hose I.D.
(in)
hose I.D.
(in)
Order No.
Assembly with earthing of the spring steel wire at the adapters
Further Article Details
Size (in)
0.984
Suitable for hose I.D. (in)
Ø 25
Further Article Details
Size (in)
1.260
Suitable for hose I.D. (in)
Ø 32
Further Article Details
Size (in)
1.575
Suitable for hose I.D. (in)
Ø 40
Further Article Details
Size (in)
1.969
Suitable for hose I.D. (in)
Ø 50
Further Article Details
Size (in)
2.559
Suitable for hose I.D. (in)
Ø 65
Further Article Details
Size (in)
2.953
Suitable for hose I.D. (in)
Ø 75
Further Article Details
Size (in)
3.150
Suitable for hose I.D. (in)
Ø 80
Further Article Details
Size (in)
3.937
Suitable for hose I.D. (in)
Ø 100
Clamp system (pressed sleeves, sealing insert); pressing sleeve: stainless steel 1.4404 (stamped) = AISI 316L
Further Article Details
Size (in)
0.984
Suitable for hose I.D. (in)
355 Ø 25
Further Article Details
Size (in)
1.575
Suitable for hose I.D. (in)
355 Ø 40
Further Article Details
Size (in)
1.969
Suitable for hose I.D. (in)
355 Ø 50
Further Article Details
Size (in)
2.559
Suitable for hose I.D. (in)
355 Ø 65
Further Article Details
Size (in)
2.953
Suitable for hose I.D. (in)
355 Ø 75
Further Article Details
Size (in)
3.150
Suitable for hose I.D. (in)
355 Ø 80
Further Article Details
Size (in)
3.937
Suitable for hose I.D. (in)
355 Ø 100
Further Article Details
Size (in)
3.937
Suitable for hose I.D. (in)
356 Ø 100
Clamp system (pressed sleeves); pressing sleeve: stainless steel 1.4301
Further Article Details
Size (in)
1.969
Suitable for hose I.D. (in)
382 Ø 50
Further Article Details
Size (in)
2.559
Suitable for hose I.D. (in)
382 Ø 65
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.
Accessories
CONNECT THREAD FITTING 234
Threaded adapter
To the product
CONNECT TRI-CLAMP FITTING 245
TRI clamp adapters based on DIN 32676 and ISO 2852
To the product
CONNECT DAIRY FITTING 247
Dairy tube support based on DIN 2826/11851
To the product
CONNECT ASEPTIC FITTING 249
Aseptic adapters based in DIN 11864-1 / DIN 11864-3
To the product