.svg){kind=logo}
CLAMP 682
Single ear clamp for assembly of membrane diffuser tubes on adapter bodies
Product details
Application
- membrane tube diffusor, for industrial and municipal wastewater treatment plant, pressure diffusion with fine bubbles, oxygen input for nitrication in activation basins, permanent and intermittend ventilation
- oxygen input and circulation in xed-bed and bioreactors, thorough mixing of activation basins, sand trap louvre ventilation, renaturation of lakes and rivers, aquacultures, sh farming
Properties
- conforms to RoHS guideline
Design
- Clamp strip: W2 stainless steel 1.4301 = AISI 304
Article variants
Size
(in)
(in)
I.D.
(mm)
(mm)
Weight
(lb/pcs)
(lb/pcs)
Band
width
(in)
width
(in)
Order No.
Clamps: stainless steel (INOX) 1.4301 (stamped) = AISI 304; for PRO2AIR Pre-PUR
Further Article Details
Size (in)
2.480
I.D. (mm)
2.618
Weight (lb/pcs)
0.020
Band width (in)
0.276
Clamps: stainless steel (INOX) 1.4571 (stamped) = AISI 316Ti; for PRO2AIR Pre-PUR
Further Article Details
Size (in)
2.480
I.D. (mm)
2.618
Weight (lb/pcs)
0.020
Band width (in)
0.276
Clamps: stainless steel (INOX) 1.4301 (stamped) = AISI 304; for EPDM and silicone
Further Article Details
Size (in)
2.480
I.D. (mm)
2.677
Weight (lb/pcs)
0.022
Band width (in)
0.276
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.