en

AIRDUC® PUR 357 VAC-TRUCK

AIRDUC_PUR_357_VAC-TRUCK_main.jpg
AIRDUC_PUR_357_VAC-TRUCK_main.jpg design
Vacuum truck hose, extremely heavy
Gas + Dust + Liquid + Solids Pre-PUR® Abrasion-resistant Smooth interior Special wire adhesion Cut lengths
Request
Datasheet
Product details Article variants Documents Accessories

Product details

Applications

  • hose/ ducting for high throughput of extremely abrasive bulk material, granulate and stone
  • suction excavator
  • concrete pump: outlet hose, discharge hose
  • construction industry: rock drill, rock drilling machine
  • raw material conveying hose for powders, granulates, sand, quartz, gravel, shards and chips/ shavings

Properties

  • extremely heavy duty
  • extremely abrasion-resistant with extremely thick polyurethane wall
  • very high pressure, vacuum and compression resistance
  • very good low temperature flexibility
  • conforms to RoHS guideline
  • REACH according to --> Technology / Technical Information / REACH

Temperature Range

  • -40°C to 90°C
  • short time to 125°C

Design

  • AIRDUC® profile hose
  • 1. spring steel wire firmly embedded in wall
  • 2. wall: special premium ester-polyurethane (Pre-PUR®)
  • 3. wall thickness 4,0 to 5,0 mm approx.

Delivery variants

  • further diameters and lengths available on request
  • transparent (standard)
  • special colours: full coloured
  • customer-specific branding

Article variants

I.D.


(in / mm)
outer Ø


(mm)
Pressure


(bar)
Vacuum


(bar)
Bending
Radius

(mm)
Weight


(kg/m)
Dimensions
in Stock

(m)
Production
Lengths

(m)
Order No.
4 / 100
123.00
3,015
1,000
550.00
3.72
-
10
357-0100-0000
Further Article Details
I.D. (in / mm)
4 / 100
outer Ø (mm)
123.00
Pressure (bar)
3,015
Vacuum (bar)
1,000
Bending Radius (mm)
550.00
Weight (kg/m)
3.72
Dimensions in Stock (m)
-
Production Lengths (m)
10
5 / 127
148.00
2,445
0,930
672.00
4.53
10
-
357-0127-0000
Further Article Details
I.D. (in / mm)
5 / 127
outer Ø (mm)
148.00
Pressure (bar)
2,445
Vacuum (bar)
0,930
Bending Radius (mm)
672.00
Weight (kg/m)
4.53
Dimensions in Stock (m)
10
Production Lengths (m)
-
6 / 152
175.00
2,055
0,775
974.00
5.35
10
-
357-0152-0000
Further Article Details
I.D. (in / mm)
6 / 152
outer Ø (mm)
175.00
Pressure (bar)
2,055
Vacuum (bar)
0,775
Bending Radius (mm)
974.00
Weight (kg/m)
5.35
Dimensions in Stock (m)
10
Production Lengths (m)
-
8 / 200
223.00
1,560
0,700
1450.00
7.63
-
5
357-0200-0000
Further Article Details
I.D. (in / mm)
8 / 200
outer Ø (mm)
223.00
Pressure (bar)
1,560
Vacuum (bar)
0,700
Bending Radius (mm)
1450.00
Weight (kg/m)
7.63
Dimensions in Stock (m)
-
Production Lengths (m)
5
- / 250
273.00
1,255
0,560
1875.00
9.43
-
5
357-0250-0000
Further Article Details
I.D. (in / mm)
- / 250
outer Ø (mm)
273.00
Pressure (bar)
1,255
Vacuum (bar)
0,560
Bending Radius (mm)
1875.00
Weight (kg/m)
9.43
Dimensions in Stock (m)
-
Production Lengths (m)
5
Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the inside of the hose arch. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data. Additional information at www.norres.com/en/technology/.

Documents

Montagehinweis / Assembly Information (384.89 KB) Verlegerichtlinien / Installation guidelines (201.24 KB)

Accessories

CLAMP 211
T-bolt clamp for attaching heavy-duty hoses with a smooth outer wall
To the product
CONNECT 244
2-part loose flange to fit mating flanges acc. to DIN 2632/2633, hole pattern DIN-EN 1092-1
To the product
CONNECT STORZ DIN ALU 251
Storz suction coupling
To the product
CONNECT KAMLOK ALU 253
Kamlok coupling
To the product
CONNECT KARDAN 254
Kardan coupling
To the product